Description
WATERPROOFER WT is a ready to use high quality ammonium stearate based waterproofing liquid. When used in Portland cement based mixtures it forms calcium stearate, a highly water repellent material. This coats the capillary pores of the cement, substantially increasing the water resistance. WATERPROOFER WT greatly minimises the absorption and permeation of water in concretes, renders, bagging mixes and mortars both above and below ground level.
WATERPROOFER WT ADVANTAGES
Improves the water resistance of cement mixes, renders, bagging mixes and mortars.
Improves workability. Can be used above or below ground level.
Available in 20L, 5L, and lL containers.
Instructions:
- Use Waterproofer WT at a rate of 1 Litre per 40kg bag of cement.
- Dilute 1 litre of Waterproofer WT to three litres of gauging water. Mix this with dry materials. Add additional water until desired consistency is achieved.
Coverage Estimates:
Render/Topping: 1 Litre of Waterproofer when mixed with sand/cement (3:1) will lay or render approx 10m_ x 12mm thick.
Mortar: 1 Litre mixed with required sand cement (3:1 ratio) will lay approx. 200 bricks.
Concrete: 8 litres per m3
Safety Data sheet available
